Airsoft Canada
Page 3 of 9 12 3 456789
Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Media (https://airsoftcanada.com/forumdisplay.php?f=30)
-   -   The "Got Wood?" Thread (https://airsoftcanada.com/showthread.php?t=123731)

R.I.T.Z May 25th, 2011 00:42
Quote:
Originally Posted by Cobrajr122 (Post 1472099)
I hate you oh so much at this point in time...
also the silencer just looks weird....

Cobrajr122 May 25th, 2011 00:47
Quote:
Originally Posted by R.I.T.Z (Post 1472102)
I hate you oh so much at this point in time...
would hate me even more if i was not trying to keep one of my other projects a secrete until Op Rhino :P


Quote:
Originally Posted by R.I.T.Z (Post 1472102)
also the silencer just looks weird....
Had to do something to cove up the longer inner TB. I recently got a shorter suppressor and a thread adapter that will bring the suppressor a bit closer to the rifles body, I hope. That should make it look a bit better.

R.I.T.Z May 25th, 2011 00:52
Quote:
Originally Posted by Cobrajr122 (Post 1472106)
would hate me even more if i was not trying to keep one of my other projects a secrete until Op Rhino :P




Had to do something to cove up the longer inner TB. I recently got a shorter suppressor and a thread adapter that will bring the suppressor a bit closer to the rifles body, I hope. That should make it look a bit better.
Its not the length its the age... you've got this amazing older style weapon with wood on it and then suddenly... modern age suppressor.... maybe a more worn looking one would work better... just my opinion

Cobrajr122 May 25th, 2011 00:59
Quote:
Originally Posted by R.I.T.Z (Post 1472109)
Its not the length its the age... you've got this amazing older style weapon with wood on it and then suddenly... modern age suppressor.... maybe a more worn looking one would work better... just my opinion
hmm good point. I'll look into it.

seabass May 25th, 2011 01:20
Quote:
Originally Posted by wildcard (Post 1471790)
So that count on the stock isnt the people you have shot it? i was gonna do that with my old ak, very nice kit

wildcard May 25th, 2011 10:33
Quote:
Originally Posted by trevorthetwigyalienman (Post 1472120)
So that count on the stock isnt the people you have shot it? i was gonna do that with my old ak, very nice kit
Actually it is 1 notch for every 2 bodies, I have used this as my primary for a while, the previous wood frame for my old CAW (this one is a King Arms) was full on both sides.

shiftsup May 25th, 2011 10:50
Quote:
Originally Posted by Strelok (Post 1459777)
Is that the Mad max shotgun? Always been interested in getting one. Are the shells compatable with madbull or do you have to get theirs?
Madbull shells are not compatible with the Mad Max shotgun. The Mad Max shells are a two piece shell (blue part is for the bb's and the brass is for the gas) and much longer than the Madbull shells.

Disco_Dante May 26th, 2011 15:13
Quote:
Originally Posted by shiftsup (Post 1472234)
Madbull shells are not compatible with the Mad Max shotgun. The Mad Max shells are a two piece shell (blue part is for the bb's and the brass is for the gas) and much longer than the Madbull shells.
I've been talking with Madbull and they've discontinued that line of shells, but they expressed interest both on Facebook and via email in creating a line of shells for the Mad Max shotgun.

ViR May 28th, 2011 10:15
1 Attachment(s)
Does the hardwood floor makes up for non-wood SVD? :)

seabass May 28th, 2011 11:11
Quote:
Originally Posted by wildcard (Post 1472225)
Actually it is 1 notch for every 2 bodies, I have used this as my primary for a while, the previous wood frame for my old CAW (this one is a King Arms) was full on both sides.
Very nice! ive always wanted to try and run something like this as a primary.

SHaKaL June 11th, 2011 16:58
My KJW-KC02 with Ra-tech M1 Carbine kit

http://i90.photobucket.com/albums/k2...-carbine-1.jpg
http://i90.photobucket.com/albums/k2...a1-carbine.jpg

All i need now is the front sight, a sling and the oiler.
Might cut the rail to install a real M1 carbine rear sight.

BTW; the kit come with a 6.03 380mm inner-barrel

BoGrain June 11th, 2011 17:10
Quote:
Originally Posted by SHaKaL (Post 1481972)
My KJW-KC02 with Ra-tech M1a1 Carbine kit

http://i90.photobucket.com/albums/k2...-carbine-1.jpg
http://i90.photobucket.com/albums/k2...a1-carbine.jpg

All i need now is the front sight, a sling and the oiler.
Might cut the rail to install a real M1 carbine rear sight.
very nice - can't wait to see it in action saturday!

R.I.T.Z June 11th, 2011 17:24
Quote:
Originally Posted by SHaKaL (Post 1481972)
/snip
All i need now is the front sight, a sling and the oiler.
Might cut the rail to install a real M1 carbine rear sight.
http://shop.ehobbyasia.com/media/cat...019_1_MARK.jpg

RA Tech KJ KC-02 10/22 M1 Carbine Front and Rear Sight Set

Frozen Tex June 11th, 2011 19:46
Quote:
Originally Posted by SHaKaL (Post 1481972)
My KJW-KC02 with Ra-tech M1a1 Carbine kit
All i need now is the front sight, a sling and the oiler.
Might cut the rail to install a real M1 carbine rear sight.
That is soooo cool! Now I see a purpose to an airsoft 10/22... Is it possible to get straight mags for it?

SHaKaL June 11th, 2011 23:38
Thanks Bograin; just hope i get my mags this week or i will have to take the thompson. Only have one mag for now...

Thanks for that RITZ; knew they made the front sight but not the rear.
I wonder how you install the rear one as you need the rail for the hopup ''adjuster'' knob... Over the rail?

Quote:
Originally Posted by Frozen Tex (Post 1482026)
That is soooo cool! Now I see a purpose to an airsoft 10/22... Is it possible to get straight mags for it?
That was my purpose when i bought the KJW.
For the mags; not that i know of :( but heh did't even know ra-tech made the rear sight so...


All times are GMT -4. The time now is 10:01.
Page 3 of 9 12 3 456789
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.