http://img.photobucket.com/albums/v4...9/IMG00492.jpg

Got the hydro carrier and...what was supposed to be a signal pouch, but they sent a shotty pouch...so I pulled the divider and most of the elastic out...anyway, now its a little utility pouch on the shingle.

I'm still looking to grab a khaki M60 pouch and maybe I can find an HSGI nalgene pouch to match.

Maritime CIRAS
http://i263.photobucket.com/albums/i...e/100_1158.jpg
http://i263.photobucket.com/albums/i...e/100_1159.jpg

What are the CADPAT hoops on the magazine?

Okay, now I'm done, the only things that may change is if I can find myself an MLCS or SFLCS M60 pouch, which will go on the left side in place of the SFLCS 100rnd SAW pouch.

Anyway, I got the AK pouches from Vince today (cheers buddeh!) and wrapped up the loose ends and sorted out a way to direct the Camelbak hose over the shoulder (left over elastic webbing).

http://img.photobucket.com/albums/v4...00712-2237.jpg

Used this kit at the first Border War game and is still my favorite.

http://www.pbase.com/bruce_m4/image/87238420.jpg
http://www.pbase.com/bruce_m4/image/87238428.jpg

EI RRS-V-MS RG
EI Rear Plate Carrier with Cummerbund RG
EI MAP RG
EI M4 Double Mag Pouch RG
EI Single Pistol Mag Pouch FB RG
EI Admin Pouch RG
EI M60 Pouch RG
EI SAW Pouch RG
EI MBITR Pouch RG
EI Medical Pouch RG
SDS 1 Quart Pouch WD
PACA Low Vis Carrier RG

I've tried ciras vests, Belt rigs, Chest rig, and cross draw vests.

I realize the ciras is too bulky and heavy to carry and the chest rig is light but limited space. I now will use my first vest aka my cross draw vest, I realize how effective they are, I was told to get better vests blah blah but I realize it's light and small.

http://i955.photobucket.com/albums/a...irsoft/rig.jpg

Voici mon début de kit non précis.

Ca ressemble beaucoup a du marsoc / seal / autre.

VoilÃ*

[IMG]http://i243.photobucket.com/albums/f...b/DSCF2275.jpg[/IMG]

http://i55.tinypic.com/kaiewy.jpg


http://i56.tinypic.com/2ebfqtg.jpg


http://i56.tinypic.com/15hfitz.jpg


ATS plate carrier, Ranger Green
Front-
Phantom admin pouch, OD spray painted krylon tan
Phantom double x2 mag pouch, Coyote
??? double pistol mag pouch, Coyote
Blackhawk MBITR pouch, OD spray painted krylon tan

Back-
Phantom MBSS hydro pack, Coyote

Ghost's vest in the Favela, MW2.

I like dirty gear :P

http://img.photobucket.com/albums/v4...n/_DSC7135.jpg

HSGI Double Deck with TACO pouches. So high speed it hurts.

Every gear (RRV, pouches, backpack) except the PACA (replica) is FSBE II issue, and MCUU is issued (but modded).

1x RRV-S
-> 1x Admin
-> 2x Single M4
-> 1x Triple M4 Shingle
-> 1x Medic
-> 2x Frag

To add: Benchmade Nivramus tan (I gotta find one)

1x Patrol Pack
-> 2x Frag
-> 1x MBITR
-> 1x Single M4

1x E&R bag

Others
1x United Star MBITR with blade antenna
2x Cyalumes
1x Medical scissors (from my issud Corpsmen medical kit)
1x ZTactical TEA Universal PTT
1x ZTactical TASC-1
1x C-A-T

Plus a bunch of random crap like ductape, ITW grimlocks, patches, etc...

http://img17.imageshack.us/img17/198/rrv201012311.jpg
http://img440.imageshack.us/img440/230/rrv201012312.jpg
http://img413.imageshack.us/img413/3...v201012313.jpg
http://img815.imageshack.us/img815/2...v201012314.jpg

Suggestions/comments/criticism on pouch placement and overall setup is very welcome.

http://i309.photobucket.com/albums/k..._MG_0015-1.jpg
http://i309.photobucket.com/albums/k...6/_MG_0018.jpg
http://i309.photobucket.com/albums/k...6/_MG_0021.jpg
http://i309.photobucket.com/albums/k...6/_MG_0022.jpg
http://i309.photobucket.com/albums/k..._MG_0012-1.jpg

LBT - 6094B

- With LRG plates in and soft armor side panels
- EI / AI / Tactical Tailor/ TAG pouches
- IR reflective square

http://i376.photobucket.com/albums/o...0121111511.jpg

-EBAIRSOFT CIRAS
-CAMELBAK Motherlode (SEAL used)
-5x double m4 mag pouches
-Maxpedition FR1 pouch

http://img214.imageshack.us/img214/8732/1005091.jpg

Condor RRV

3x double open top universal mag pouches (pantac)
2x smoke grenade pouches (pantac) for tornadoes
Pantac admin panel
Pantac utility pouch (plan to replace with an actual CB one, this one is Khaki)
Pantac radio pouch
Element PTT and Swimmer headset
Condor pistol mag pouch

Turns out that Flyye back panels work on the Condor rig, so now I'm trying to source one at a decent price so i can move my radio to the back, and put a MAP on it.

Here's my MBSS setup, doorkicker inspired:
http://i597.photobucket.com/albums/t...1/IMG_4184.jpg
http://i597.photobucket.com/albums/t...1/IMG_4187.jpg
http://i597.photobucket.com/albums/t...1/IMG_4188.jpg

Pantac MBSS with plates,
1x LBT MBITR,
1x triple m4,
1x SDS 200 rd. SAW,
1x TT medic pouch,
some chemlights, sharpies, gear hangers, carabiners, a tornado grenade, some tri-fold flex cuffs, a kenwood radio, a garmin e-trex, my old IBH (soon to be replaced by a MSA 2000) and my old shotgun with it's ghetto scabbard!
Im waiting for my some FSBEII stuff, my united star PRC 148, my PACA, and some other stuff to remake all my setup for a Marsoc inspired setup!
The (very oddly placed) SDS 200 rd. SAW and TT medic pouch are soon to be replaced by a allied industries (the ressource center) FSBEII MAP!