Tanio Koba / KJW M4 GBBR Basic Information and FAQ

audi_bhoy · December 4th, 2011, 18:36

Make sure your spacers and o-ring are seating properly on the shaft (all pushed toward the back stopper), otherwise it will cause inconsistency in FPS from shot to shot.

StanB. · December 5th, 2011, 03:19

Thanks, gonna check if they are sitting perfectly.

LocoYokoPoco · December 5th, 2011, 03:56

Yea, the cradle velocity reducer does indeed reduce the overall velocity even without the spacers. If you look at it, the cradle valve only has 2 cutouts, while the stock one has 4.

White_knight · December 5th, 2011, 05:56

got some new parts for my m4, if you want a rock solid gun with absolutely NO rattle in the receiver, get the RAtech magic pin. i highly recommend it

http://www.airsoftparts.ca/store2/in...oducts_id=2114

StanB. · December 5th, 2011, 06:34

Quote:

Originally Posted by White_knight

got some new parts for my m4, if you want a rock solid gun with absolutely NO rattle in the receiver, get the RAtech magic pin. i highly recommend it

http://www.airsoftparts.ca/store2/in...oducts_id=2114

Just the front pin? Just the rear pin? Or both?

LocoYokoPoco · December 5th, 2011, 08:06

Quote:

Originally Posted by White_knight

got some new parts for my m4, if you want a rock solid gun with absolutely NO rattle in the receiver, get the RAtech magic pin. i highly recommend it

http://www.airsoftparts.ca/store2/in...oducts_id=2114

I don't know about you, but I had to file some material off the lower to get the pin to fit correctly. But otherwise, it makes the gun absolutely rock solid.

Quote:

Originally Posted by StanB.

Just the front pin? Just the rear pin? Or both?

It's the front pin.

White_knight · December 5th, 2011, 09:22

yes i had to do the same, only took a few strong passes with a file. only 1mm was needed. but after that man its solid. no rattle at all

StanB. · December 5th, 2011, 09:29

Question: When I go in full-auto or fast semi, after 3 fast shots, a big load of gas comes out with the next shot, does anyone else got this phenomenom? Temperature is around 22 degrees celsius.

audi_bhoy · December 5th, 2011, 18:47

Are you keeping your M4 well lubricated, speaking of the internals, and do you had silicone oil to your propane as it should? Also, this might be your mag's valve that isn't oiled properly...

StanB. · December 6th, 2011, 03:56

Mags and Internals are all well lubricated (a few with silicone spray and the most orings with silicone lube). And pretty much nobody here in Austria uses Propane, we all use Green or Top Gas which already has silicone in it.

KoreyC · December 7th, 2011, 21:00

Anyone know where I can find some sort of guide to installing the V2 bolt carrier and buffer? I've tried searching for a while, but no dice..

Saberwing · December 7th, 2011, 21:02

Quote:

Originally Posted by KoreyC

Anyone know where I can find some sort of guide to installing the V2 bolt carrier and buffer? I've tried searching for a while, but no dice..

It should be a drop in replacement

KoreyC · December 7th, 2011, 21:35

Quote:

Originally Posted by Saberwing

It should be a drop in replacement

Yeah, I just looked a moment ago and 'facepalm'ed. Tried to get back here before anyone noticed, not quick enough I guess.

LocoYokoPoco · December 7th, 2011, 21:47

Anyone know of someone in Canada that can get the TDC (Grub screw hopup mod) done? Cradle unfortunately only offers that service in the states

Coresair · December 7th, 2011, 22:36

Sorry to hi-jack the thread (since I'm more of a WE guy) but I'm actually pretty glad/excited for you guys!

It's in french, but pics will do the talking:

http://www.airsoftnews.fr/2011/12/07...bb-r-kj-works/

cheers guys!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 5th, 2011, 03:56	#648
LocoYokoPoco a.k.a. ian209 Trader rating Join Date: May 2009 Location: Calgary, AB, Canada	Yea, the cradle velocity reducer does indeed reduce the overall velocity even without the spacers. If you look at it, the cradle valve only has 2 cutouts, while the stock one has 4. __________________ World record in propane sniffing. Armory -KWA Tavor TAR21 GBBR -TM PX4 w/Detonator Aluminum Slide

December 5th, 2011, 05:56	#649
White_knight Trader rating Join Date: Jul 2006	got some new parts for my m4, if you want a rock solid gun with absolutely NO rattle in the receiver, get the RAtech magic pin. i highly recommend it http://www.airsoftparts.ca/store2/in...oducts_id=2114 __________________ Burnaby / Vancouver area Age verifier

December 5th, 2011, 09:22	#652
White_knight Trader rating Join Date: Jul 2006	yes i had to do the same, only took a few strong passes with a file. only 1mm was needed. but after that man its solid. no rattle at all __________________ Burnaby / Vancouver area Age verifier

December 4th, 2011, 18:36	#646
audi_bhoy Trader rating Join Date: Mar 2009 Location: Trois-Rivières	Make sure your spacers and o-ring are seating properly on the shaft (all pushed toward the back stopper), otherwise it will cause inconsistency in FPS from shot to shot.

December 5th, 2011, 03:19	#647
StanB. Trader rating Join Date: Nov 2011	Thanks, gonna check if they are sitting perfectly.

December 5th, 2011, 09:29	#653
StanB. Trader rating Join Date: Nov 2011	Question: When I go in full-auto or fast semi, after 3 fast shots, a big load of gas comes out with the next shot, does anyone else got this phenomenom? Temperature is around 22 degrees celsius.

December 5th, 2011, 18:47	#654
audi_bhoy Trader rating Join Date: Mar 2009 Location: Trois-Rivières	Are you keeping your M4 well lubricated, speaking of the internals, and do you had silicone oil to your propane as it should? Also, this might be your mag's valve that isn't oiled properly...

December 6th, 2011, 03:56	#655
StanB. Trader rating Join Date: Nov 2011	Mags and Internals are all well lubricated (a few with silicone spray and the most orings with silicone lube). And pretty much nobody here in Austria uses Propane, we all use Green or Top Gas which already has silicone in it.

December 7th, 2011, 21:00	#656
KoreyC Trader rating Join Date: Aug 2011	Anyone know where I can find some sort of guide to installing the V2 bolt carrier and buffer? I've tried searching for a while, but no dice..

December 7th, 2011, 21:47	#659
LocoYokoPoco a.k.a. ian209 Trader rating Join Date: May 2009 Location: Calgary, AB, Canada	Anyone know of someone in Canada that can get the TDC (Grub screw hopup mod) done? Cradle unfortunately only offers that service in the states __________________ World record in propane sniffing. Armory -KWA Tavor TAR21 GBBR -TM PX4 w/Detonator Aluminum Slide

Tanio Koba / KJW M4 GBBR Basic Information and FAQ

Airsoft Guns Discussion