Airsoft Canada
BuyAirsoft

Go Back   Airsoft Canada > Discussion > Doctor's Corner > AEG Solutions
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

maybe its just me....ICS A3 issues

:

AEG Solutions

Reply
 
Thread Tools
Old April 25th, 2007, 04:04   #1
six4
 
six4's Avatar
 
Join Date: Jan 2006
Location: mission b.c.
Send a message via MSN to six4
maybe its just me....ICS A3 issues

after about 8 months of play my prized ics -a3 was shooting a unacceptable 286fps,,,down from 340fps. after being adament about playing with an out of the box stock weapon until the spring sagged ( well,,i put metal bushings in but thats it) i decided i had earned the right to upgrade. what a mess,,,was an easy enough swap being a split mechbox but one simple spring upgrade sure upset the balance of the rifle. went to a systema m120. nice quality part,, installation was a snap,,,but only having an 8.4v 2400 m/h nicad the rate of fire seemed as effective as trying to run underwater. forget semi auto,,cycling was erratic and undependable. the weapon shot a respectable and consistant 377fps,,but no more double tap kills with an erratic semi auto,,,,and no kill is more satisfying when you run someone out of ammo in their high-cap pop up and give 'em two in the chest ,,,, so i took the m120 out and put an m100 in( was a gimme ) and im awaiting a piston/piston head to go with the new spring. im hoping i will get a better air seal with this combination. i also plan to go to a m110 spring in the near future. with a better air seal an m110 i should be around 380-390. to make this long story short,,upgrades need to be chosen wisely,,if you are not going with high torque gears/ motor /battery to accompany a high spring upgrade,,,,dont bother. it will only upset the balance between reliability and dependability.

Last edited by six4; April 25th, 2007 at 04:14..
six4 is offline   Reply With Quote
Old April 10th, 2009, 21:02   #2
the_spork_of_death
 
the_spork_of_death's Avatar
 
Join Date: Apr 2006
Location: prince george
i put an m160 spring in my m4 after uprgrading everything to handle it (foolish mistake i used a half tooth poly carb piston) fired about 3 rounds and the back 1/2 inch of the piston broke off. but it was 3 devistatingly hard shots on the crono
__________________
this is my rifle, there are many like it but this one is mine. with out me my rifle is nothing, with out my rifle i am nothing.
the_spork_of_death is offline   Reply With Quote
Old April 10th, 2009, 21:19   #3
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
This section is for AEG SOLUTIONS, not new problems.
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner > AEG Solutions

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
BuyAirsoft

All times are GMT -4. The time now is 11:53.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.