Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Tanio Koba / KJW M4 GBBR Basic Information and FAQ

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old May 15th, 2012, 23:26   #751
Gester24
 
Join Date: Jul 2011
Location: Brampton Ontario
okey so i just need to tighten my delta ring with a tool i can buy on ebay right? umm btw that airsoft even in june 3rd, i want my kjw m4 to be a sniper as i have a high scope on it, will it be considered as a sniper than an automatic rifle? Also, mine is stock, so im not sure how the fps is on that, i use .25g bbs and i am not sure if it is allowed. i hear most games only allow .20. thanks.
Gester24 is offline   Reply With Quote
Old May 15th, 2012, 23:29   #752
Gester24
 
Join Date: Jul 2011
Location: Brampton Ontario
oh and my hand rails shift left to right a bit, so im guessing its a delta ring issue...
Gester24 is offline   Reply With Quote
Old May 15th, 2012, 23:39   #753
Forever_kaos
 
Forever_kaos's Avatar
 
Join Date: Oct 2006
Location: Mississauga.
99% of all games are measured with .2's.
Usually in Ontario, if your weapon is capable of automatic/semi fire it falls under the normal AEG/GBBR rules, Bolt Action only.

But that is hugely up to the host.
Forever_kaos is offline   Reply With Quote
Old May 16th, 2012, 00:08   #754
Gester24
 
Join Date: Jul 2011
Location: Brampton Ontario
Quote:
Originally Posted by Forever_kaos View Post
99% of all games are measured with .2's.
Usually in Ontario, if your weapon is capable of automatic/semi fire it falls under the normal AEG/GBBR rules, Bolt Action only.

But that is hugely up to the host.
ok so basically i'll have to use .20g on the field.. but all i carry is .25g is there no possibility that i can use .25g so that i can keep my fps low? im not sure as to how to reduce the fps. i heard about the cradle velocity reducer but im not sure what version my m4 is. thanks for the reply.
Gester24 is offline   Reply With Quote
Old May 16th, 2012, 00:09   #755
audi_bhoy
 
Join Date: Mar 2009
Location: Trois-Rivières
Yup. You will have to lower it to 400 fps on .2g. To check if your delta ring is loose, take the handguards off and look at the delta ring itself for any looseness.

EDIT:

.2g is for measurement purpose only. As an example, 330fps on .2g will deliver a 1joule power.
if you are using .25g, then to equal the 1joule power will you have to shoot a maximum of 300fps, approximately.

In the end, it is not the FPS that counts, but the energy delivered on the impact.
audi_bhoy is offline   Reply With Quote
Old May 16th, 2012, 01:49   #756
Gester24
 
Join Date: Jul 2011
Location: Brampton Ontario
Quote:
Originally Posted by audi_bhoy View Post
Yup. You will have to lower it to 400 fps on .2g. To check if your delta ring is loose, take the handguards off and look at the delta ring itself for any looseness.

EDIT:

.2g is for measurement purpose only. As an example, 330fps on .2g will deliver a 1joule power.
if you are using .25g, then to equal the 1joule power will you have to shoot a maximum of 300fps, approximately.

In the end, it is not the FPS that counts, but the energy delivered on the impact.
much appreciated, idk what its called but my circular guard swivels. the circular piece you push down on. it swivels. do you know where i can get a reducer?
Gester24 is offline   Reply With Quote
Old May 16th, 2012, 11:48   #757
SKI
 
SKI's Avatar
 
Join Date: Oct 2002
Location: Mississauga
Quote:
Originally Posted by Gester24 View Post
okey so i just need to tighten my delta ring with a tool i can buy on ebay right? umm btw that airsoft even in june 3rd, i want my kjw m4 to be a sniper as i have a high scope on it, will it be considered as a sniper than an automatic rifle? Also, mine is stock, so im not sure how the fps is on that, i use .25g bbs and i am not sure if it is allowed. i hear most games only allow .20. thanks.
If you don't have the tool, you can come by my shop and I can tighten it for you. My shop is CT Motorsports located on the north/west corner of Derry and Bramalea. Just let me know via PM if you want to swing by so I can make sure I'm there and I have my tool with me.
__________________
www.ctmotorsports.ca
SKI is offline   Reply With Quote
Old May 16th, 2012, 22:48   #758
Gester24
 
Join Date: Jul 2011
Location: Brampton Ontario
Quote:
Originally Posted by SKI View Post
If you don't have the tool, you can come by my shop and I can tighten it for you. My shop is CT Motorsports located on the north/west corner of Derry and Bramalea. Just let me know via PM if you want to swing by so I can make sure I'm there and I have my tool with me.
alright sweet i'll be down to pass by. i'll pm you and see when you're free. thanks.
Gester24 is offline   Reply With Quote
Old May 19th, 2012, 01:27   #759
IggysPiggy
 
Join Date: Sep 2007
anyone tried the ra tech 380 6.01 barrel? I have one on order figured id see if anyones tried using it before.
IggysPiggy is offline   Reply With Quote
Old May 19th, 2012, 02:02   #760
Rommen
 
Join Date: Jul 2011
Location: Mississauga, Ontario.
Quote:
Originally Posted by IggysPiggy View Post
anyone tried the ra tech 380 6.01 barrel? I have one on order figured id see if anyones tried using it before.
I think that will be too long lol. I have a 6.01 363mm and it comes right to the base of the flash hider. Let us know how the 380mm fits
Rommen is offline   Reply With Quote
Old May 19th, 2012, 21:36   #761
D2D
 
D2D's Avatar
 
Join Date: Oct 2011
Location: Toronto
Anyone want to do a 'group order' of velocity reducers with me? The shipping fee is a flat $14, so we'd all be saving a couple bucks.

Feel free to PM me.
D2D is offline   Reply With Quote
Old May 19th, 2012, 21:54   #762
IggysPiggy
 
Join Date: Sep 2007
I have it set up as a dmr upper so longer front set including silencer. I have the 280 ra tech in my cqbr upper. I was hoping for a performance standpoint, itll be here soon enough so well see how it goes. D2d i have a brand new vr in the bag that never got used i could prolly part ways with it if interested
IggysPiggy is offline   Reply With Quote
Old June 4th, 2012, 12:43   #763
Saberwing
 
Saberwing's Avatar
 
Join Date: Mar 2007
Location: London, ON
Anybody have any tips on loading the mags without a loading tool? Loaned mine to a friend and won't have it back in time for a game today...
__________________
KJW Mk18 MOD1 BLOCK 2 - Well VSR-10 - Les Baer Ultimate Recon
Saberwing is offline   Reply With Quote
Old June 4th, 2012, 17:20   #764
audi_bhoy
 
Join Date: Mar 2009
Location: Trois-Rivières
You're pretty out of luck, the only other way I found, was with a speed loader, pushing one BB into the mag, then pushing it down with the speed loader's rod, then loading the next BB...

On another note, I tried once again to install the V2 bolt and metal lower body on mine, and it fucked again... Hopefully it's just the bolt, I'll test it out this week...
audi_bhoy is offline   Reply With Quote
Old June 6th, 2012, 17:26   #765
daishi
 
daishi's Avatar
 
Join Date: Feb 2011
Location: Toronto
Send a message via MSN to daishi
Where can you get a spare loading tool that will work with the kjw if anyone knows?
__________________
Quote:
Originally Posted by Janus View Post
Is he a spambot or is he a francophone? I really can't tell the difference sometimes.
Quote:
Originally Posted by Latvian291 View Post
This is one of the funniest things I've read.
Commandment 1 of LMGesus: Fuck getting kills. That's the job of your teammates, otherwise known as the cannon fodder. Your job is to be scary.
daishi is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 14:40.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.