Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Upgrading my JG G36C

:

Upgrades & Modifications

Reply
 
Thread Tools
Old July 11th, 2012, 17:00   #1
Joewa654321
 
Join Date: Jul 2012
Upgrading my JG G36C

Anyone know a good V3 gearbox that will fit a JG G36C? I'm looking to upgrade my entire gearbox.
Joewa654321 is offline   Reply With Quote
Old July 11th, 2012, 17:15   #2
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
Why?
What do you want to accomplish?

You don't need to replace the entire thing.
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old July 12th, 2012, 11:21   #3
Joewa654321
 
Join Date: Jul 2012
Well I suppose I want to replace the spur gear. Any sites that might sell one that would fit the JG G36C?
Joewa654321 is offline   Reply With Quote
Old July 12th, 2012, 11:48   #4
Darklen
Administrator
 
Join Date: Jan 2004
Location: Red Deer, AB
It's a standard part, nothing special. You can buy and entire gear set for as under $50. Some retailers do sell seperate gears though it's pretty rare.
__________________
ASC Age Verifier for Red Deer & Area Alberta
Darklen is offline   Reply With Quote
Old July 12th, 2012, 12:24   #5
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
So you want to replace the entire gearbox because the spur gear is bad?
That doesn't make much sense.

I'll sell you a spur gear (I think I have one) for $5 or $10.
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old July 12th, 2012, 12:39   #6
Joewa654321
 
Join Date: Jul 2012
Lol sorry about that. I'm still new to this stuff.
Joewa654321 is offline   Reply With Quote
Old July 12th, 2012, 12:42   #7
Joewa654321
 
Join Date: Jul 2012
Would this one work? >>>http://www.airsoftparts.ca/store2/in...oducts_id=1840
Joewa654321 is offline   Reply With Quote
Old July 12th, 2012, 12:47   #8
durak
 
Join Date: Aug 2009
Location: Ottawa, Ontario
Generally if your replacing one gear, you need to replace the whole set, not every brand cuts their gears the same way. So in short, yes it would fit in the gun, no it likely wont work as it wont be compatible with the gear set currently in the gun, unless the gun has a modify gear set already installed.
durak is offline   Reply With Quote
Old July 12th, 2012, 12:50   #9
Joewa654321
 
Join Date: Jul 2012
Ok and just wondering, i'm looking at gear sets and it says things like 13:1, 100:200, etc. What do these mean and are there any specific gear sets I should pick up?
Joewa654321 is offline   Reply With Quote
Old July 12th, 2012, 13:05   #10
slink182
 
slink182's Avatar
 
Join Date: May 2011
Location: Kitchener, ON
Y'know, if you don't know what you're doing, or what you're looking for (or at), may I suggest contacting your local gundoc and engaging his services? It would probably save you a ton of guessing, frustration, and money (in parts that may/may not play well together).

Just a suggestion.
__________________
VFC SCAR-L - VFC SCAR SSR - KJW Hi-Capa 5.1 - CAW M79
The Three Sisters - WE G39 E/K/C
Quote:
Originally Posted by kalnaren View Post
Stalker stays where he is.
His BB's fly across the country to hit their target.
slink182 is offline   Reply With Quote
Old July 12th, 2012, 13:10   #11
durak
 
Join Date: Aug 2009
Location: Ottawa, Ontario
thats the ratio, 13:1 basicly means it takes 13 revolutions of your motor to cycle the piston once. look for something in the 18:1 to 22:1 ratio. Modify highspeed gears are about that. as are king arms torque gears. the lower the first number the higher rate of fire, the higer they are lets you pull heavier springs.

the easiest most pain free way of doing your gearset is the modify smooth series, they are pre shimed, come with the bushings, and anti-reversal latch. they only need to be droped in and away you go, definately worth the 100$ price tag. especially if you have no idea what you are doing with the insides of a gearbox. you will probly need a 6mm set for your gearbox.
durak is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 23:17.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.