Help with performance

kaotiskt · February 25th, 2017, 12:53

Greets,

I'm unhappy so far with the range and accuracy performance of my M4. Well, range is okay I spose, but it's mostly accuracy. I have been upgrading parts and such, but it's still not performing as well as other Stock M4s that I'm comparing it to.

So here's my setup, is there anything missing or I should be replacing?

Stock G&G CM16 Gearbox, lubed well.
M120 Spring
Madbull Black Python v.2 363mm, 6.03
SHS Plastic Hop Up chamber
G&G Green Rubber

I've teflon taped around barrel/chamber assembly. [edit] I have also wrapped some electrical tape around the barrel to stabilize it. However there is a little wobble going through the silencer.

Any guidance with this stuff is greatly appreciated, I'm still fairly new to this but trying to figure it out.

Thanks.

Ricochet · February 25th, 2017, 13:52

Get your gun r-hopped by a pro. Run high quality BBs, 0.28g or heavier. Look into a higher quality barrel (PDI or Laylax). Make sure your nozzle is in good shape, possibly replace. Ensure your gun is cycling and feeding properly (mechbox, motor, battery, magazines, etc).

As for performance issues; ask your doctor about cialis...

kaotiskt · February 25th, 2017, 15:13

I'm using .25s, so I'll get some .28s next to try.
Nozzle is stock G&G, so could likely be due to be replaced

As for feeding issues, it feeds good, batteries are new 9.6v, can't use lipo, nor want to. Motor was fine last time I had it checked out (prior to my current upgrades).

I don't know anybody that can do the r-hoppness, and I honestly don't feel comfortable figuring it out on my own through online tutorials or anything..

I was hoping not to switch out the barrel being I had JUST got it.. I'll leave that as a last resort I spose.

Ricochet · February 25th, 2017, 15:18

Barrel swap isn't likely necessary, but it could help. The BBs are a must, but make sure the brand is good, not just the weight. Find someone to do an R-hop, that's your number one. There should be people on here that can somewhat near you, or just ship it to them.

ThunderCactus · February 25th, 2017, 15:22

If the fps is consistent, then run heavier BBs.
If it's still inaccurate on good, heavy BBs, then get a tech to redo the hop rubber

kaotiskt · February 25th, 2017, 15:29

Awesome, this is useful info.

Thanks a ton. I'll try the bbs first, likely the cheapest option so get that outta the way. Then go from there.

Thanks guys

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 25th, 2017, 12:53	#1
kaotiskt Trader rating Join Date: Jan 2016 Location: Sarnia, Ontario	Help with performance Greets, I'm unhappy so far with the range and accuracy performance of my M4. Well, range is okay I spose, but it's mostly accuracy. I have been upgrading parts and such, but it's still not performing as well as other Stock M4s that I'm comparing it to. So here's my setup, is there anything missing or I should be replacing? Stock G&G CM16 Gearbox, lubed well. M120 Spring Madbull Black Python v.2 363mm, 6.03 SHS Plastic Hop Up chamber G&G Green Rubber I've teflon taped around barrel/chamber assembly. [edit] I have also wrapped some electrical tape around the barrel to stabilize it. However there is a little wobble going through the silencer. Any guidance with this stuff is greatly appreciated, I'm still fairly new to this but trying to figure it out. Thanks. __________________ Last edited by kaotiskt; February 25th, 2017 at 12:56..

February 25th, 2017, 13:52	#2
Ricochet How much sand CAN you fit in your vagina!? Trader rating Join Date: Feb 2008 Location: North Delta, BC (Greater Vancouver)	Get your gun r-hopped by a pro. Run high quality BBs, 0.28g or heavier. Look into a higher quality barrel (PDI or Laylax). Make sure your nozzle is in good shape, possibly replace. Ensure your gun is cycling and feeding properly (mechbox, motor, battery, magazines, etc). As for performance issues; ask your doctor about cialis... __________________ I have developed a new sport called Airhard. Pretty much the same as Airsoft, except you have to maintain an erection...

February 25th, 2017, 15:13	#3
kaotiskt Trader rating Join Date: Jan 2016 Location: Sarnia, Ontario	I'm using .25s, so I'll get some .28s next to try. Nozzle is stock G&G, so could likely be due to be replaced As for feeding issues, it feeds good, batteries are new 9.6v, can't use lipo, nor want to. Motor was fine last time I had it checked out (prior to my current upgrades). I don't know anybody that can do the r-hoppness, and I honestly don't feel comfortable figuring it out on my own through online tutorials or anything.. I was hoping not to switch out the barrel being I had JUST got it.. I'll leave that as a last resort I spose. __________________

February 25th, 2017, 15:18	#4
Ricochet How much sand CAN you fit in your vagina!? Trader rating Join Date: Feb 2008 Location: North Delta, BC (Greater Vancouver)	Barrel swap isn't likely necessary, but it could help. The BBs are a must, but make sure the brand is good, not just the weight. Find someone to do an R-hop, that's your number one. There should be people on here that can somewhat near you, or just ship it to them. __________________ I have developed a new sport called Airhard. Pretty much the same as Airsoft, except you have to maintain an erection...

February 25th, 2017, 15:22	#5
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	If the fps is consistent, then run heavier BBs. If it's still inaccurate on good, heavy BBs, then get a tech to redo the hop rubber

February 25th, 2017, 15:29	#6
kaotiskt Trader rating Join Date: Jan 2016 Location: Sarnia, Ontario	Awesome, this is useful info. Thanks a ton. I'll try the bbs first, likely the cheapest option so get that outta the way. Then go from there. Thanks guys __________________

Help with performance

Doctor's Corner