|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
January 2nd, 2006, 15:57
|
#1 |
|
TOP M249 gearbox problem (angs kit)
I've got a TOP M249 with the Angs cylinder kit installed. Being the mechanically inclined fellow I am I've got it completely stripped apart. It's a fairly simple mechanism, but I'm having a hard time trying to figure out how the tappet for the nozzle works. I realize the gear that sits behind it moves it forward to close the brass barrel seal, but I can't figure out how the tappet moves backwards. Does it connect directly or indirectly to the gear? Is there a return spring that I'm overlooking? I didn't get the books with this thing, and I've tried in vain for the last few days to Google a parts list or even find TOP's website. Any help would be appreciated. I'd like to get it running soon...
|
|
|
|
January 2nd, 2006, 16:37
|
#2 |
|
Super Moderator
|
If I remember correctly, the tappet plate is free moving and is pushed back by the spring loaded nozzle on the hopup unit. I can take apart my gun to get some pics if you need.
__________________
bruce: Team Bad Karma-(BK-05) : Special Battalion East-(SBE-01) |
|
|
|
|
January 2nd, 2006, 20:42
|
#3 |
|
|
Ah ok, that would be perfect. Thanks!
|
|
|
|
|
January 4th, 2006, 20:05
|
#4 |
|
|
I got it worked out. The mechbox needed to be pushed back a little bit. Damned finicky thing.
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
