Quote:
Originally Posted by immortalundead
for my gun i cut a small hole into the tube, like this,
and then on the buffer tube, i made a small angled channel, so it didnt squish the wires
hope that helps |
The problem with this method is that unless you have a plug popper, your gearbox (or at the very least, the trigger assembly/switch) will be forever tethered to your lower receiver without doing a full completely disassembly of the entire switch assembly. At best, it's a major annoyance.
If you don't plan on ever or very very very rarely taking your gun apart, then it shouldn't be that much of an issue.