|
Good deal, but not in the same league stock.
With a new hop-up chamber (they suffer from feeding issues with the stock one). I use a KingArms no problems. I am tempted in trying a Madbull ultimate or Prowin-style to see...
RHOP, new set of bearings (stock are copper bushings that wear really fast), they perform great.
Cylinder FPS is inconsistent on the stock spring. A good VSR-10 spring works VERY nice and is cheap (I used a 120 PSS10 to get 389fps and cut-down the stock spring to make a CQB setup 345fps).
You don't get the bolt-stock and gizmos, but as a high-end gun, it's great.
It also runs great under heavy rain ;P
That's what I run as my sole AEG.
The stock gearset is short-stroked 2 tooth (13). You can use a Systema PTW piston with a standard 15t gearset. Gives higher FPS but drops the ROF a bit. On a 7.4 LiPo, with the 390fps cylinder I push 17rps (Xortech 3200) with the short-stroked stock piston.
__________________
Quote:
Originally Posted by Drake
Damnit, don't make me add "no discussing temporal paradoxes" to the rules or I'll go back in time and ban you last week.
|
|