Quote:
Originally Posted by jw4563
I have a g18c and my guarder loading muzzle keep on breaking after a few mags. Ive heard this is a recurring problem and was wondering if anyone found a solution. Im kinda stuck using guarder ones cause their the only ones i can find for the 18.
|
Unfortunately, there aren't much replacement parts for the Glock 18c. Loading muzzles are hard to come by.
Furthermore, the stock loading muzzles are sadly better than the latter choices out there, IMO. I think you'd be better off using stock loading muzzles.
The only solution I can see with that Guarder one is to lower the internal pressure of the gas by switching to duster gas or just let out air to vent the gas pressure by creating a NOT so perfect seal with the piston head.
However, it really depends on HOW that muzzle is breaking. Look at the stress fractures and see if you can pin point where it begins to determine the fix.
OR
You modify the loading muzzle itself like Turok_T did above. Using Glue to re-enforce the entire muzzle.
The problem with his method is that in cold temperatures, the glue itself might crack and just flake off. I've spoken to him over the phone about but when we spoke he hasn't tested it in cold weather. So I don't know how long it will last.
It's pretty good though. Like he says, it's modular so can take off as much as you can or add or re-start the whole process if you botch it the first time
.....