[e-luder]

Originally Posted by kar120c

Anyone knows is this hammer spring is suitable only for the TN G17? http://www.wgcshop.com/wgc2008/main/...ecial&rs=glock hammer spring&catid=&cat=
I need for a KJW G26

This hammer spring is my preferred choice. It's much more consistent than the Guarder ones. You get a tighter FPS output.

Don't know about mounting on a KJW though. I haven't tried it before....

I found on sale this http://www.airsoftextremo.com/acceso...000057190.html
I didn't know about it, I think is nice not only to add a silencer but an orange muzzle too, when required

Be careful when you use a suppressor.
It pulls your outerbarrel down and interrupts the slide action. In most cases, if the suppressor is too heavy, your slide will not be able return to battery at all. Rather, it will get stuck on the forward stroke.

In the extreme cases, and this occurs mostly on short barrelled pistols, sometimes it will actually interrupt the tilt cycle of the barrel and will lock up the slide. This is because the weight of the suppressor will not allow the barrel to slip beneath the slide. The result is that your gun will vent out the magazine because the valve disconnect is not tripped since the slide is "locked" (it can't cycle and remains in battery).

So be cautious. The barrel is fine to acquire and install but the suppressor needs to be light enough so that it doesn't interrupt the functionality of the slide and barrel...