Quote:
Originally Posted by MultipleParadox
Noted
Thanks for the input!
|
BTW, that hammer bearing question you posted on the other thread...
That's normal.
Even on the stock hammer set, that component has a tendency to catch on the BBU. This problem also persists in the latter G17 platform. So it's not uncommon for you to have these issues.
It would be wrong for you to wear the BBU down. You just have to run it's course. Lube the gun. Charge and dry fire the gun a million times without any gas and you should be good to go.
You COULD pre-emptively wear the hammer bearing down but that would be counter intuitive of the whole replacement process. But if you are going to do it regardless, just make sure you take off as less as possible.... and keep re-testing it.
Otherwise, if you take too much off, you won't get that sear to lock the hammer. lol