Quote:
Originally Posted by e-luder
You may also want to look into upgrading your Sear (silver thing in the video).
Pot metal VS steel is not very good mix. The steel component will almost instantly win and wear down the pot metal component.
If your buying the KM hammer, I suggest you get a steel sear of some sort. The sear hooks on the hammer (the contact point on hammer to the sear) will wear the hammer hook (the contact point on the sear to the hammer) on the sear quicker.
For costing, AIP has a complete steel hammer set for the Marui Glock 18c. The thing is, they are almost sold out everywhere.
But from my personal experience, they need a bit of fitting work to get into place and bit of a break in period. Particularly, the valve knocker tends to create a weak strike on the blowoff valve. But you can fix that easily...
|
http://shop.ehobbyasia.com/upgrade-p...-18c-60-1.html
Are you talking about that? Or could you show ne a picture or an out of stock link? Because i found aip steel hammer parts if that's what you mean?