[e-luder]

[IMG][/IMG]

This is a fully upgraded Tokyo Marui Glock 17. Most of the TM bits have been taken out and replaced with good aftermarket upgrades.
Here's What's been done:

The slide assembley
-Guarder Dessert Storm aluminum slide polished to a mirror finish
-PGC aluminum outerbarrel custom fitted for the Guarder slide
-PDI 01 Tightbore Inner Barrel
-NineBall hop up bucking
-AIP Lightened muzzle housing
-Customized AIP Glo sights for Marui G17 (red)
-Guarder Enhanced loading muzzle
-Customized Firefly rocket valve
-Custom tuned Shooter's design recoil spring (150% strength) w/ steel recoil spring guide with custom made shock buffers installed

The Frame Assembly:
-Custom fitted Guarder Enhanced Tan frame
-GunsModify Extended Slide Catch
-GunsModify Extended Slide lock
-GunsModify Aluminum trigger w/ red safety trigger
-Guarder steel trigger bar
-Guarder Steel magazine catch
-AIP Steel hammer set w/ custom fitted hammer bearing
-Shooter's Design 150% strength mainspring
-Custom fitted Shooter's Design Steel Valve Knocker

Magazine:
-Shooter's design Glock logo baseplate
-Some sort of high flow blowoff valve (i forgot who made it)

Work done to the gun:

All these parts have been custom fitted by me to give the gun a smooth cycle. The slide has been sanded a pinch to fit the Guarder frame. The Firefly Rocket valve has been modified to increase the gas output to the BB by slimming down its "legs" and opening the intake holes. The slide has a lightened BBU to allow a fast return. The recoil spring has been custom fitted with some shock buffers to short stroke the pistol for a crispier cycle and better gas efficiency. The valve knocker has been modified so that it creates an efficient strike on the blowoff valve. All of the internal hammer parts have been polished to rid of any friction of moving parts. All moving parts have been greased for protection against wear. The underside of the slide has been sanded and polished to prevent friction and wearing on the outerbarrel. The magazine chamber has been widened a pinch to allow easier reloading whilst the installation of a magazine well. The hop up clamp has been tightened to produce a tight airseal in conjunction with the hop up bucking. The slide guide rails have been sanded for easier, nearly frictionless action of the slide.

This gun is tuned to shoot at 361-345FPS on 20's on a full tank of green gas/propane. There is a high-flo blowoff valve installed in the magazine.