Airsoft Canada - View Single Post - Madbull XM108HP Cherry ball-bearings

ap27 · June 24th, 2012, 11:14

The grease worked like a charm. Thanks everyone!

EDIT. Have another issue now. I reassemble it the way Voorhees mentioned, but it doesn't hold gas. When I fill it, all the gas comes out through the BB holes and when I open it up again, two of the bearings have fallen out of the valve into the lower half where the spring/plunger sit.

Any ideas?

June 24th, 2012, 11:14	#5
ap27 Trader rating Join Date: Jun 2010 Location: Milton, ON	The grease worked like a charm. Thanks everyone! EDIT. Have another issue now. I reassemble it the way Voorhees mentioned, but it doesn't hold gas. When I fill it, all the gas comes out through the BB holes and when I open it up again, two of the bearings have fallen out of the valve into the lower half where the spring/plunger sit. Any ideas? __________________ H&K G36c (KWA) / Glock 18c (TM) / Kimber LAPD SWAT Custom (TM) / Mossberg M500 (ACM) Last edited by ap27; June 24th, 2012 at 14:12..