Airsoft Canada - View Single Post

Ninja_En_Short · January 21st, 2012, 16:04

Accuracy is more about the internals actually, put a good barrel and hop up and any gun can become "suited" for DMR, but remember a "real" DMR gun is not supposed to be a gun with a 10/12" barrel.
A DMR should have a semi auto gun (at least, full auto is optional) with 14.5 (M4 length) or above (16 or 20").
Example : I've been using an SR25 (7.62x51 semi auto) with a 16" if I recall, great accuracy once modded and the length of the gun (with or without suppressor) never had been a hindrance.

January 21st, 2012, 16:04	#18
Ninja_En_Short Trader rating Join Date: Jul 2007 Location: France, Canada (Montréal)	Accuracy is more about the internals actually, put a good barrel and hop up and any gun can become "suited" for DMR, but remember a "real" DMR gun is not supposed to be a gun with a 10/12" barrel. A DMR should have a semi auto gun (at least, full auto is optional) with 14.5 (M4 length) or above (16 or 20"). Example : I've been using an SR25 (7.62x51 semi auto) with a 16" if I recall, great accuracy once modded and the length of the gun (with or without suppressor) never had been a hindrance. __________________ Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting)