Airsoft Canada - View Single Post

Delta Charlie · November 4th, 2011, 00:44

[quote=L473ncy;1556172]Probably a good base for one yes. But out of the box probably not, but play with it and see how you like it before spending money on upgrades like this.

Depending on local field rules (here "DMR's" are up to 450 FPS single shot at 60 ft. MED) then just leave the spring compressed for a few days and see what kind of output you get. Right off the bat you'll probably want to use .28 gram BB's minimum, if not .30's.

After that, get some Prommy upgrades; purple bucking, NEO chamber, and a quality TBB (I know the prommy ones might be a bit cost prohibitive). Then you should be good.[/

Are the tightbores in the max series any good?

November 4th, 2011, 00:44	#22
Delta Charlie Trader rating Join Date: Feb 2011	[quote=L473ncy;1556172]Probably a good base for one yes. But out of the box probably not, but play with it and see how you like it before spending money on upgrades like this. Depending on local field rules (here "DMR's" are up to 450 FPS single shot at 60 ft. MED) then just leave the spring compressed for a few days and see what kind of output you get. Right off the bat you'll probably want to use .28 gram BB's minimum, if not .30's. After that, get some Prommy upgrades; purple bucking, NEO chamber, and a quality TBB (I know the prommy ones might be a bit cost prohibitive). Then you should be good.[/ Are the tightbores in the max series any good? Last edited by Delta Charlie; November 4th, 2011 at 00:47..