Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   Tanio Koba / KJW M4 GBBR Basic Information and FAQ (https://airsoftcanada.com/showthread.php?t=96773)

Gester24 May 15th, 2012 23:26

okey so i just need to tighten my delta ring with a tool i can buy on ebay right? umm btw that airsoft even in june 3rd, i want my kjw m4 to be a sniper as i have a high scope on it, will it be considered as a sniper than an automatic rifle? Also, mine is stock, so im not sure how the fps is on that, i use .25g bbs and i am not sure if it is allowed. i hear most games only allow .20. thanks.

Gester24 May 15th, 2012 23:29

oh and my hand rails shift left to right a bit, so im guessing its a delta ring issue...

Forever_kaos May 15th, 2012 23:39

99% of all games are measured with .2's.
Usually in Ontario, if your weapon is capable of automatic/semi fire it falls under the normal AEG/GBBR rules, Bolt Action only.

But that is hugely up to the host.

Gester24 May 16th, 2012 00:08

Quote:

Originally Posted by Forever_kaos (Post 1654559)
99% of all games are measured with .2's.
Usually in Ontario, if your weapon is capable of automatic/semi fire it falls under the normal AEG/GBBR rules, Bolt Action only.

But that is hugely up to the host.

ok so basically i'll have to use .20g on the field.. but all i carry is .25g is there no possibility that i can use .25g so that i can keep my fps low? im not sure as to how to reduce the fps. i heard about the cradle velocity reducer but im not sure what version my m4 is. thanks for the reply.

audi_bhoy May 16th, 2012 00:09

Yup. You will have to lower it to 400 fps on .2g. To check if your delta ring is loose, take the handguards off and look at the delta ring itself for any looseness.

EDIT:

.2g is for measurement purpose only. As an example, 330fps on .2g will deliver a 1joule power.
if you are using .25g, then to equal the 1joule power will you have to shoot a maximum of 300fps, approximately.

In the end, it is not the FPS that counts, but the energy delivered on the impact.

Gester24 May 16th, 2012 01:49

Quote:

Originally Posted by audi_bhoy (Post 1654572)
Yup. You will have to lower it to 400 fps on .2g. To check if your delta ring is loose, take the handguards off and look at the delta ring itself for any looseness.

EDIT:

.2g is for measurement purpose only. As an example, 330fps on .2g will deliver a 1joule power.
if you are using .25g, then to equal the 1joule power will you have to shoot a maximum of 300fps, approximately.

In the end, it is not the FPS that counts, but the energy delivered on the impact.

much appreciated, idk what its called but my circular guard swivels. the circular piece you push down on. it swivels. do you know where i can get a reducer?

SKI May 16th, 2012 11:48

Quote:

Originally Posted by Gester24 (Post 1654552)
okey so i just need to tighten my delta ring with a tool i can buy on ebay right? umm btw that airsoft even in june 3rd, i want my kjw m4 to be a sniper as i have a high scope on it, will it be considered as a sniper than an automatic rifle? Also, mine is stock, so im not sure how the fps is on that, i use .25g bbs and i am not sure if it is allowed. i hear most games only allow .20. thanks.

If you don't have the tool, you can come by my shop and I can tighten it for you. My shop is CT Motorsports located on the north/west corner of Derry and Bramalea. Just let me know via PM if you want to swing by so I can make sure I'm there and I have my tool with me.

Gester24 May 16th, 2012 22:48

Quote:

Originally Posted by SKI (Post 1654673)
If you don't have the tool, you can come by my shop and I can tighten it for you. My shop is CT Motorsports located on the north/west corner of Derry and Bramalea. Just let me know via PM if you want to swing by so I can make sure I'm there and I have my tool with me.

alright sweet i'll be down to pass by. i'll pm you and see when you're free. thanks.

IggysPiggy May 19th, 2012 01:27

anyone tried the ra tech 380 6.01 barrel? I have one on order figured id see if anyones tried using it before.

Rommen May 19th, 2012 02:02

Quote:

Originally Posted by IggysPiggy (Post 1655923)
anyone tried the ra tech 380 6.01 barrel? I have one on order figured id see if anyones tried using it before.

I think that will be too long lol. I have a 6.01 363mm and it comes right to the base of the flash hider. Let us know how the 380mm fits

D2D May 19th, 2012 21:36

Anyone want to do a 'group order' of velocity reducers with me? The shipping fee is a flat $14, so we'd all be saving a couple bucks.

Feel free to PM me.

IggysPiggy May 19th, 2012 21:54

I have it set up as a dmr upper so longer front set including silencer. I have the 280 ra tech in my cqbr upper. I was hoping for a performance standpoint, itll be here soon enough so well see how it goes. D2d i have a brand new vr in the bag that never got used i could prolly part ways with it if interested

Saberwing June 4th, 2012 12:43

Anybody have any tips on loading the mags without a loading tool? Loaned mine to a friend and won't have it back in time for a game today...

audi_bhoy June 4th, 2012 17:20

You're pretty out of luck, the only other way I found, was with a speed loader, pushing one BB into the mag, then pushing it down with the speed loader's rod, then loading the next BB...

On another note, I tried once again to install the V2 bolt and metal lower body on mine, and it fucked again... Hopefully it's just the bolt, I'll test it out this week...

daishi June 6th, 2012 17:26

Where can you get a spare loading tool that will work with the kjw if anyone knows?


All times are GMT -4. The time now is 22:43.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.